The ASI IMRJ0845 is an RJ45 terminal block DIN rail module used as a RJ45 Ethernet Connector breakout board to transition from a Cat5 cable to wire. This RJ45 to terminal block adapter is a more professional type of Cat5e terminal block whereas it mounts onto DIN rail, has one RJ45 connector for a Cat5e industrial ethernet cable, a solder bus board for customizing each wire and a double level terminal block with 8 positions and 2 shielded terminals. This RJ45 breakout board is clearly labeled to ensure accurate wiring and there are convenient component holes in each circuit between the RJ45 connector and the terminal block. You can easily add components such as resistors, MOVs or other if your application requires these components. In addition to a RJ45 connector to terminal block ASI also offer DIN rail mounted Cat5e patch panel modules with 3 RJ45 connectors in series, 2 rows of 3 RJ45 connectors in series and 3 rows of RJ45 connectors in series along with a splitter module. The splitter RJ45 ethernet Cat5e module also DIN rail mounts and provides a transition from one connector to two. ASI offers a variety of interface modules to transition from D-sub to wire, ribbon cable to wire, rj11 to wire, PLC to wire just to name a few.